Pages: 1 2 3 4 5 6 7 8 9 10

             1.OPERATING TEMPERATURE:
                 55˚C to + 125˚C
             2.INSULATION RESISTANCE:
                100 MEGOHMS MINIMUM @ 25˚C and 100 VDC
                AFTER 2 MINUTES.
             3.HERMETICALLY SEALED 
                LIFE TEST:
                250 HOURS@ 1.5 TIMES WORKING VOLTAGE
                IR AFTER TEST: GREATER THAN 50 MEGOHMS
             4.MOISTURE RESISTANCE:
                PER METHOD 106 OF MIL-STD-202
                AFTER TEST FILTERS SHALL MEET ALL INTERNAL
                REQUIREMENTS.
             5.TEMPERATURE CYCLING AND IMMERSION:
                PER METHOD 102, CONDITION D AND METHOD 104,
                CONDITION B OF MIL-STD-202, AFTER TEST FILTERS
                SHALL MEET ALL INITIAL REQUIREMENTS

              6. VIBRATION:
                  PER METHOD 204, CONDITION B OF MIL-STD-202.
                AFTER TEST FILTERS SHALL MEET ALL INITIAL
                  REQUIREMENTS
              7. MARKING:
                P/N, WORKING VOLAGE, CURRENT AND DATE
                  CODE
              8. MILITARY SPECIFICATIONS:
                LOW-PASS FILTERS MEET OR EXCEED THE
                  APPLICABLE REQUIREMENTS OF MIL-F-15733.
              9. ATTENUATION:
                  MEASUREMENTS MADE IN A 50 OHM SYSTEM PER
                  MIL-STD-220

50 VDCW

STANDARD RATINGS
MINIMUM INSERTION LOSS IN dB (MIL-STD-220)

PART NO.	CURRENT RATED(AMPS)	30KH	150KHz	300KHz	1MHz	10MHz	100MHz	1GHz	10GHz	MAX. D.C. RESISTANCE(OHMS	ATTENUATION CURV
LMB-50-006-	.060	45	70	80	80	80	80	80	80	70	A
LMB-100-010-	.100	35	55	70	80	80	80	80	80	15	B
LMB-115-025-	.250	26	47	60	80	80	80	80	80	4	C
LMB-115-045-	.450	20	42	53	72	80	80	80	80	1.2	D
LMB-115-100-	1.000	16	36	48	66	80	80	80	80	.09	E
LMB-115-200-	2.000	13	34	46	64	80	80	80	80	0.75	F
LMB-115-300-	3.000	10	32	44	62	80	80	80	80	0.3	G
LMB-115-500-	5.000	10	32	44	62	80	80	80	80	0.1	G
LMB-115-103-	10.000	10	32	44	62	80	80	80	80	0.01	G

100 VDCW

STANDARD RATINGS
MINIMUM INSERTION LOSS IN dB (MIL-STD-220)

PART NO.	CURRENT RATED(AMPS)	30KH	150KHz	300KHz	1MHz	10MHz	100MHz	1GHz	10GHz	MAX. D.C. RESISTANCE(OHMS	ATTENUATION CURV
LMB-50-006-	.060	45	68	80	80	80	80	80	80	76	A
LMB-100-010-	.100	34	54	70	80	80	80	80	80	20	B
LMB-115-025-	.250	24	47	60	80	80	80	80	80	6	C
LMB-115-045-	.450	18	41	53	74	80	80	80	80	2.4	D
LMB-115-100-	1.000	15	35	50	70	80	80	80	80	1.8	E
LMB-115-200-	2.000	12	34	47	67	80	80	80	80	1.4	F
LMB-115-300-	3.000	10	32	44	63	80	80	80	80	0.8	G
LMB-115-500-	5.000	8	30	42	62	80	80	80	80	0.3	H
LMB-115-103-	10.000	7	29	41	60	80	80	80	80	0.016	J

115 VACW

STANDARD RATINGS
MINIMUM INSERTION LOSS IN dB (MIL-STD-220)

PART NO.	CURRENT RATED(AMPS)	30KH	150KHz	300KHz	1MHz	10MHz	100MHz	1GHz	10GHz	MAX. D.C. RESISTANCE(OHMS	ATTENUATION CURV
LMB-50-006-	.060	30	53	68	80	80	80	80	80	70	A
LMB-100-010-	.100	24	47	61	80	80	80	80	80	18	B
LMB-115-025-	.250	10	34	48	70	80	80	80	80	9	C
LMB-115-045-	.450	6	29	42	62	80	80	80	80	4.8	D
LMB-115-100-	1.000	0	23	36	56	80	80	80	80	3.6	E
LMB-115-200-	2.000	0	20	32	52	80	80	80	80	2.8	F
LMB-115-300-	3.000	0	14	26	46	80	80	80	80	1.6	G
LMB-115-500-	5.000	0	10	22	42	80	80	80	80	0.6	H
LMB-115-103-	10.000	0	4	17	37	73	80	80	80	0.03	J

All Content ® 2011 CAPCON® INTERNATIONAL INC.